Alcatel-Lucent 7450 ESS OS Configuration Manual page 112

Configuration Commands
port
Syntax port port-name
no port
Context config>router>interface
Description
This command creates an association with a logical IP interface and a physical port.
An interface can also be associated with the system (loopback address).
The command returns an error if the interface is already associated with another port or the system. In
this case, the association must be deleted before the command is re-attempted. The port-id can be in
one of the following forms:
The no form of the command deletes the association with the port. The no form of this command can
only be performed when the interface is administratively down.
Default
No port is associated with the IP interface.
Parameters
port-id — The physical port identifier to associate with the IP interface.
proxy-arp-policy
Syntax [no] proxy-arp-policy policy-name [policy-name...(up to 5 max)]
Context config>router>interface
Description
This command enables and configure proxy ARP on the interface and specifies an existing policy-
statement to analyze match and action criteria that controls the flow of routing information to and
Page 112
• Ethernet Interfaces
If the card in the slot has MDAs, port-id is in the slot_number/MDA_number/port_number
format; for example, 1/1/3 specifies port 3 of the MDA installed in MDA slot 1 on the card
installed in chassis slot 1.
• SONET/SDH interfaces
When the port-id represents a POS interface, the port-id must include the channel-id. The POS
interface must be configured as a network port.
Values
port-id slot/mda/port[.channel]
ccag-id
lag-id
ccag-id.path-id[cc-type]
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap
lag-id
lag keyword
id 1 — 200
7450 ESS OS Router Configuration Guide