Table of Contents
Advertisement
Cflowd Configuration Commands
Unlike other commands and parameters where the default state is not indicated in the configuration
file. The shutdown and no shutdown states are always indicated in system generated configuration
files.
template-set
Syntax
template-set {basic | mpls-ip}
Context
config>cflowd>collector
Description
This command specifies the set of templates sent to the collector when using cflowd Version 9 or
Version 10.
Default
basic
Parameters
basic — Basic flow data is sent.
mpls-ip — Extended flow data is sent that includes IP and MPLS information.
inactive-timeout
Syntax
inactive-timeout seconds
no inactive-timeout
Context
config>cflowd
Description
This command specifies the amount of time, in seconds, that must elapse without a packet matching a
flow in order for the flow to be considered inactive.
The no form of this command resets the inactive timeout back to the default of 15 seconds.
Note: Existing flows will not inherit the new inactive-timeout value if this parameter is changed
while cflowd is active. The inactive-timeout value for a flow is set when the flow is first created in
the active cache table and does not change dynamically.
Default
15
Parameters
seconds — Specifies the amount of time, in seconds, that must elapse without a packet matching a
Page 462
flow in order for the flow to be considered inactive.
Values
10 — 600
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
