Table of Contents
Advertisement
group
Syntax
group tunnel-group-name [create]
no group tunnel-group-name
Context
config>router>l2tp
Description
This command configures an L2TP tunnel group.
Parameters
tunnel-group-name — Specifies a name string to identify a L2TP group up to 63 characters in length.
create — This keyword is mandatory when creating a tunnel group name. The create keyword
session-limit
Syntax
session-limit session-limit
no session-limit
Context
config>router>l2tp
Description
This command configures the L2TP session limit for the router. L2TP is connection-oriented. The
L2TP Network Server (LNS) and LAC maintain state for each call that is initiated or answered by an
LAC. An L2TP session is created between the LAC and LNS when an end-to-end PPP connection is
established between a remote system and the LNS. Datagrams related to the PPP connection are sent
over the tunnel between the LAC and LNS. There is a one to one relationship between established
L2TP sessions and their associated calls.
Parameters
session-limit — Specifies the number of sessions allowed.
avp-hiding
Syntax
avp-hiding sensitive | always
no avp-hiding
Context
config>router>l2tp>group
Description
This command configures Attribute Value Pair (AVP) hiding. This capability can be used to avoid the
passing of sensitive data, such as user passwords, as cleartext in an AVP.
The no form of the command returns the value to never allow AVP hiding.
Parameters
avp-hiding — Specifies the method to be used for the authentication of the tunnels in this L2TP
7450 ESS OS Router Configuration Guide
requirement can be enabled/disabled in the environment>create context.
Default
no session-limit
Values
1 — 131071
group.
IP Router Configuration
Page 89
Advertisement
Table of Contents
