Table of Contents
Advertisement
Show Commands
Parameters
ip-int-name — Specify the IP interface name.
ip-address — Specify the address of the IPv6 interface address.
mac ieee-mac-address — Specify the MAC address.
summary — Displays summary neighbor information.
Output
Neighbor Output — The following table describes neighbor output fields.
Sample Output
B:CORE2# show router neighbor
===============================================================================
Neighbor Table (Router: Base)
===============================================================================
IPv6 Address
-------------------------------------------------------------------------------
FE80::203:FAFF:FE78:5C88
FE80::203:FAFF:FE81:6888
-------------------------------------------------------------------------------
No. of Neighbor Entries: 2
===============================================================================
B:CORE2#
network-domains
Syntax
network-domains [detail] [network-domain-name]
Context
show>router
Description
This command displays network-domains information.
Parameters
detail — Displays detailed network-domains information.
network-domain-name — Displays information for a specific network domain.
Sample
*A:Dut-T>config>router# show router network-domains
===============================================================================
Network Domain Table
===============================================================================
Network Domain
-------------------------------------------------------------------------------
net1
default
-------------------------------------------------------------------------------
Network Domains : 2
===============================================================================
*A:Dut-T>config>router#
Page 152
MAC Address
00:16:4d:50:17:a3
00:03:fa:1a:79:22
Interface
State
Expiry
net1_1_2
STALE
03h52m08s
net1_2_3
STALE
03h29m28s
Description
Network domain 1
Default Network Domain
7450 ESS OS Router Configuration Guide
Type
RTR
Dynamic
Yes
Dynamic
Yes
Advertisement
Table of Contents
