Table of Contents
Advertisement
route-table
Syntax
route-table [ip-prefix[/prefix-length] [longer | exact | protocol]] | [protocol protocol-name]
[all]]
route-table [family] summary
route-table tunnel-endpoints [ip-prefix[/prefix-length] [longer | exact | protocol]
route-table [ip-prefix[/prefix-length] next-hop-type tunneled
route-table [next-hop-type tunneled]
Context
show>router
Description
This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
family — Specify the type of routing information to be distributed by this peer group.
ip-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length.
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
exact — Displays the exact route matching the ip-prefix/mask masks.
protocol protocol-name — Displays routes learned from the specified protocol.
summary — Displays a route table summary information.
tunnel-endpoints — Specifies to include tunnel endpoint information.
next-hop-type tunneled — Displays only the tunneled next-hops. For each route entry, the tunnel
Output
Standard Route Table Output — The following table describes the standard output fields for the
route table.
Dest Address
Next Hop
Type
Protocol
Age
7450 ESS OS Router Configuration Guide
Values
ipv4 — Displays only those BGP peers that have the IPv4 family enabled and not
those capable of exchanging IP-VPN routes.
mcast-ipv4 — Displays the BGP peers that are IPv4 multicast capable.
Values
ipv4-prefix:
ipv4-prefix-length:
Values
local, sub-mgmt, managed, static, ospf, ospf3, isis, rip, aggregate, bgp, bgp-vpn
owner and tunnel ID is shown.
Label
The route destination address and mask.
The next hop IP address for the route destination.
Local — The route is a local route.
Remote — The route is a remote route.
The protocol through which the route was learned.
The route age in seconds for the route.
IP Router Configuration
a.b.c.d (host bits must be set to 0)
0 — 32
Description
Page 155
Advertisement
Table of Contents
