Table of Contents
Advertisement
Configuration Commands
network-domains
Syntax
network-domains
Context
config>router
Description
This command opens context for defining network-domains. This command is applicable only in the
base routing context.
description
Syntax
[no] description string
Context
config>router>network-domains>network-domain
Description
This command creates a text description stored in the configuration file for a configuration context.
The no form of the command removes the description string from the context.
Default
no description
Parameters
string — The description character string. Allowed values are any string up to 80 characters long
network-domain
Syntax
network-domain network-domain-name [create]
no network-domain network-domain-name
Context
config>router>network-domains
Description
This command creates network-domains that can be associated with individual interfaces and SDPs.
Default
network-domain "default"
Parameters
network-domain-name — Network domain name character string.
router-id
Syntax
router-id ip-address
no router-id
Context
config>router
Description
This command configures the router ID for the router instance.
The router ID is used by both OSPF and BGP routing protocols in this instance of the routing table
manager. IS-IS uses the router ID value as its system ID.
Page 78
composed of printable, 7-bit ASCII characters. If the string contains special character (#, $,
space, etc.), the entire string must be enclosed within double quotes.
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
