EDID Configuration Page
The
EDID Configuration
save the output 1 EDID to one of the user locations. Access the page by clicking the
Configuration
Adjustments
The page displays the EDID drop boxes for inputs on installed boards only.
1 1
Figure 71.
NOTE: The page displays the EDID drop boxes for inputs and outputs on installed
boards only.
Changing the EDID setting
Select the EDID for an input as follows:
1.
Click the drop-down list for the desired input (
A drop-down list appears.
2.
Click and drag the slider or click on the scroll up
button or the scroll down
value is visible.
3.
Click the desired value (
page allows you to select the EDID for each installed input and
link (see figure 71,
) on the left of the
1
,
,
Output Adjustments
XTP Power
EDID Configuration Page
button until the desired
).
2
Set and View Ties
, or
Global Presets
1 1
, right).
1
2 2
XTP CrossPoint Series • HTML Operation
EDID
,
Input
page.
142