Passwords Page - Extron electronics XTP CrossPoint1600 User Manual

Passwords Page

Access the
the
System Settings
1 1
Figure 61.
NOTE: If the matrix switcher is password-protected, fields on this page can be edited
only by people logged in as administrators.
The fields on the
passwords. Passwords are case sensitive and are limited to as many as 12 upper-case
and lower-case alphanumeric characters. Each password must be entered twice; once
in the
Password
Characters in these fields are masked by asterisks (
protect an access level, leave the
After entering the password in both fields, click the
NOTE: An administrator password must be created before a user password can be
created.
Resetting a password
Reset an existing password so that no password is required as follows:
1. Replace any existing password by entering a single space character in the
and
Re-enter Password
2. Click the
page (see figure 61) by clicking the
Passwords
,
Email Settings
192.168.254.254 192.168.254.254
2 2
Passwords Page
page are for entering and verifying administrator and user
Passwords
field and then again in the
Password
fields (see figure 61,
button ( ).
Submit 3
Passwords
, or page.
Firmware Upgrade
32 32
2 2
3 3
field (see figure 61,
Re-enter Password
). If you do not want to password
*****
field and the
Re-enter Password
button (
Submit 3
).
2
XTP CrossPoint Series • HTML Operation
link ( ) on the left of
1
).
2
field blank.
).
Password
129