System Configuration Page - Extron electronics CrossPoint 450 Plus Series User Manual

System Configuration Page

The CrossPoint 450 Plus or MAV Plus switcher downloads the System
Configuration page (figure 6-4) when you click the Configuration tab. The screen
consists of fields in which you can view and edit IP administration and system
settings. The Email Settings and Passwords pages can be accessed by clicking the
appropriate link. See appendix A, "Ethernet Connection", for basic information
about IP addresses and subnetting.
Refresh.
Select Passwords.
Select Email Settings.
Select Firmware Upgrade.
Figure 6-4 — System Configuration page
On password-protected connections, there are two levels of protection:
administrator and user. Administrators have full access to all switching capabilities
and editing functions. Users can create ties, create and recall presets, set RGB and
audio mutes, and view all settings with the exception of passwords.
• Ethernet connection to the switcher, either entering SIS commands (see
chapter 4, "Programmer's Guide") or using the Extron Matrix Switcher+
Control Program (see chapter 5, "Matrix Software") is password protected.
• Connection via the RS-232/RS-422 port is not password protected.
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation 6-5