Extron electronics XTP CrossPoint1600 User Manual page 55

Press the Video button
to toggle on and off.
VIDEO
The button lights green
when selected.
Until you select an input, the buttons for all untied outputs light
amber if no inputs are tied, green if no video inputs are tied
(only audio is tied), or red if no audio are tied (only video is tied).
2
1 3 4 5
NOTE: Output mutes are protected when front panel Lock mode 2 is selected. You
can view the mutes in Lock mode 2 but you cannot change them from the front
Setting the Front Panel Locks (Executive Modes)
panel (see
If front panel Lock mode 2 is selected and you try to perform steps 4 and 5, the
actions are ignored.
4. Mute outputs: One at a time:
a. Press and hold the
begins to blink.
b. Press and hold the
begins to blink.
Mute outputs one at a time.
Press and hold the Output 3 button.
3
2 seconds
Press and hold the Output 4 button.
4
2 seconds
NOTES:
•
If both video and audio are selected, the mute action toggles both the video
and audio outputs. If either the video output or the audio output is already
muted, the unmuted output is muted and the muted output is unmuted.
• If both video and audio are selected and only video is muted, the output
button blinks between green and amber. If only audio is selected, the
output button blinks between red and amber.
Press the Audio button
I / O
to toggle on and off.
AUDIO
The button lights red
when selected.
OUTPUTS
6 7
8 15 16
button for approximately 2 seconds until the button
Output 3
button for approximately 2 seconds until the button
Output 4
3
The button blinks to indicate
that the output is muted.
Green-Unlit = Video is muted.
Red-Unlit = Audio is muted.
Green-Amber = Video and audio are muted.
(Amber is visible only after you have
selected the Video and Audio buttons).
4 The button blinks to indicate
that the output is muted.
XTP CrossPoint Series • Operation
on page 59).
47