Input And Output Buttons - Extron electronics XTP CrossPoint1600 User Manual

Input and Output Buttons

NOTES:
Primary functions
Action
Indication Color: LED appearance:
Secondary functions
Presets Action
Indication
Input audio Action
level
Indication
Indication
Output Action
audio
Indication
volume
Indication
Output Action
mutes
Indication
Background Action
illumination
A
B
•
Input and output buttons cannot select an input or output number that is higher
than your matrix size or if the board that supports it is not installed. Unselectable
buttons do have other functions as described in the following pages.
• See Front Panel Operations, beginning on page 35, for detailed descriptions of
the following operations.
Select input or output for tie being created.
Amber: video and audio tie
Green: video only tie
Red: audio only tie
1 2
Lit: A preset has already been saved to this location.
Blink: Preset location is selected to be saved.
Input buttons: Select the input for audio gain or attenuation adjustment.
Input buttons lit: Input audio selected for adjustment.
Output buttons lit or blinking: Indicate the input gain or attenuation level.
Output buttons: Select the output for audio volume adjustment.
Output buttons lit: Output audio is selected for adjustment.
Input buttons lit or blinking: Indicated the output volume level.
Output buttons: Press and hold to mute or unmute the output.
Output buttons blinking: Output is muted.
and buttons:
Input 1 Input 2
Toggle between background
illumination or buttons unlit.
Input buttons (see figure 28
buttons have one primary (…) and three secondary functions (•):
Select and identify an input for creating ties or for audio level adjustment.
…
Select a preset.
•
Display the output volume level.
•
(Input 1 and Input 2 only) Toggle background illumination of the buttons on and off.
•
Output buttons (see figure 28
(…) and three secondary functions (•):
Select and identify an output for ties or for volume adjustment.
…
Select a preset.
•
Mute the output.
•
Display the audio level of the selected input.
•
Blink: potential tie/untie.
Lit: current tie
3
through
Select a preset in Preset mode.
on page 29 or figure 29 on page 30) — The input
or figure 29) — The output buttons have one primary
XTP CrossPoint Series • Operation
16 32
or
31