Extron electronics XTP CrossPoint1600 User Manual page 99

Command Function
Input sync detection
View all input connections
Example
(XTP CrossPoint 3200):
Inputs on XTP CP 4i HD 4K PLUS, XTP CP 4i HDMI, XTP CP 4i HDMI DMA, XTP CP 4i DVI Pro,
Audio input gain and attenuation
NOTE: The set gain ( G ) and set attenuation (
Set audio input gain to +dB value
Example:
Set audio input attenuation to -dB
value
Increment gain
Example:
Decrement gain
Example:
Read input gain
Example:
Inputs on XTP CP 4i HD 4K PLUS, XTP CP 4i HDMI, XTP CP 4i HDMI DMA, XTP CP 4i DVI Pro, and
Audio routing selections
NOTE: These commands select between the audio embedded in the digital video stream and the 2-channel analog audio.
Input audio selection
Example 1:
Example 2:
View input audio selection
View all input audio selections
Inputs on XTP CP 4i HD 4K PLUS, XTP CP 4i HDMI, XTP CP 4i HDMI DMA, and XTP CP 4i DVI Pro
Input reports as an HDCP-authorized device
HDCP authorized device on
HDCP authorized device off
View HDCP authorized status
X%
NOTE: = Input signal status
X^ = Input number (for other than tie)
X& = Audio gain
X* = Numeric dB value
X( = Audio attenuation
X1) = Resolution and rate for black screen
X1! = Input audio source
X1@ = HDCP authorized device
SIS Command Response
(Host to Unit) (Unit to Host)
X%
0LS
0LS
Response Status:
XTP CP 4i 3G, XTP CP 4i VGA Boards
g ) commands are case sensitive.
X^ X&
* G In
1*2G
In01•Aud+02
X^ X(
* g In
X^
+G In
5+G
In05•Aud+03
X^
–G In
7–G
In07•Aud-09
X^ X*]
G
3G
-06
XTP CP 4i 3G Boards
E X^ X1! }
I * AFMT AfmtI
E }
I1*1AFMT AfmtI01*1
E }
I1*0AFMT AfmtI01*0
E X^ } X1!]
I AFMT
E } X1!
IAFMT
Boards
E X^ }
E *1HDCP HdcpE
E X^ }
E *0HDCP HdcpE
E X^ } X1@]
E HDCP
0 = No signal detected
–
01 16 or 32
– (1 dB per step)
0 24
to (43 steps of gain or attenuation) (0 dB = default)
–18 +24
– (1 dB per step)
1 18
= 1280x720p @50 Hz
2
= Auto (see the example above)
0
= HDMI (de-embedded digital audio) (default)
1
= Analog 2-channel audio
2
= off
0
Additional Description
X% X% X% ]
... 16 or 32
1 2 3 n
status of an input, starting from input 1.
Sync detected
No input detected
0 0 0 1 1 1 0 1 0 0 1 0 1. . .0
Input: 1 2 3 4 5 6 7 8 9 10111213
X^ X*]
•Aud
]
Set input 1 audio gain to +2 dB.
X^ X*]
•Aud
X^ X*]
Increase gain by 1 dB.
•Aud
]
Increase audio input 5 level from +2 dB
to +3 dB.
X^ X*]
Decrease gain by 1 dB.
•Aud
]
Decrease audio input 7 level from -8 dB
to -9 dB.
]
Audio input 3 level is at -6 dB.
X^ X1!]
Use audio from the
*
]
Use digital audio from the HDMI port of
input 1.
]
Auto (0): Digital audio takes priority over
analog audio.
X1! X1! X1! ]
16 or 32
1 2 3 ... n
selections, starting from input 1.
X^ ]
Set the input as an HDCP authorized
*1
device (default).
X^ ]
Set the input as not an HDCP
*0
authorized device.
Show HDCP authorized device status.
1 = Sync detected
= 1280x720p @60 Hz
4
= on (default)
1
XTP CrossPoint Series • Programming Guide
X%
( ) s; each is the connection
n
Sync detected
32
X1!
source.
( n ) sequential audio input
= 1920x1080p @60 Hz
6
91