Extron electronics XTP CrossPoint1600 User Manual page 51

NOTE: You can also view a set of ties by selecting a tied output. Demonstrate this
as follows:
•
Note the number of a lit output button, and then press and release the output
button for an untied (unlit or background illumination) output.
• Observe that all of the untied outputs light.
•
Then press the output button that you noted previously.
• Observe that the selected output button, the tied input button (input 5), and the
output buttons light for all of the outputs that are tied to the input.
5. Deselect video: Press and release
Press the button.
The button is unlit or
background illuminated
VIDEO
when deselected.
The output buttons for outputs that are tied to Input 5
light red to indicate audio ties (audio breakaway).
1 2 3 4 5
The output buttons for outputs that are not tied to Input 5 are
either unlit or background illuminated.
6. Toggle audio off and video on: Press and release
Press button.
I / O
The button lights
green when selected.
VIDEO
The output buttons for outputs that are tied to Input 5
light green to indicate video ties (audio breakaway).
1 2 3 4
The output buttons for outputs that are not tied to Input 5 are
either unlit or background illuminated.
If video ties are established for input 5, the output buttons light green for all video
outputs tied to input 5. If no ties are established for input 5, all output buttons return to
either unlit or to background illumination.
7. Exit View-only mode: Press and release
Press the button.
All input buttons and output buttons
VIEW
return to unlit or background illumination.
The View button returns to unlit or background illumination.
.
Video
The Audio button
I / O
remains lit red to
indicate that only
AUDIO
audio is selected.
OUTPUTS
6 7 8 15 16
Press the button.
The button is unlit
or background
AUDIO
illuminated when
deselected.
OUTPUTS
5 6 7
8 15 16
.
View
XTP CrossPoint Series • Operation
and .
Video Audio
43