Table of Contents
Advertisement
Selecting audio breakaway
NOTES:
•
Available for inputs on XTP CP 4i (XTP), XTP CP 4i 4K (XTP), XTP CP 4i Fiber 4K,
XTP II CP 4i HD 4K PLUS, XTP CP 4i HDMI, XTP CP 4i HDMI DMA, and
XTP CP 4i DVI Pro boards.
•
When
digital input.
•
When
associated analog audio port.
•
When
You can select the input audio for output as follows:
1.
Click the
input (
2.
Click the desired setting,
Changing the input gain and attenuation
You can set the level of gain or attenuation (-18 dB to +24 dB) of each
analog audio input from the
levels so there are no noticeable volume differences between sources.
Change the gain and attenuation setting for an analog audio input as
follows:
1.
Click the
(
, right). A drop-down list appears.
1
2.
Click and drag the slider or click on the scroll up
scroll down
3.
Click and the desired value (
NOTE: As an alternative to steps 2 and 3, or to listen to the
audio as you make adjustments, click on the up
down
Output Adjustments Page
The
Output Adjustments
output video and audio are processed and muted. Access the page by
clicking the
the
Set and View Ties
page.
Presets
The page tailors the options available for selection when a XTP CP 4o SA (analog audio)
output board is installed.
available for selection.
NOTE: All options are available for selection for XTP CP 4o and XTP CP 4o 4K
(XTP output) boards. If the output from an endpoint connected to the XTP board is
compatible with the option, the adjustment is made. The
indicates the change regardless.
is selected, the matrix switcher routes the audio embedded in the
HDMI
is selected, the matrix switcher routes the analog audio from the
Analog
is selected, digital audio takes priority over analog audio.
Auto
Audio Breakaway Select
, right). A drop-down list appears.
1
,
Auto
HDMI
Input Adjustments
drop-down list for the desired input
Input Audio Level
button until the desired value is visible.
).
2
button.
page is a central location for changing how
link (see
Output Adjustments
,
Input Adjustments
Allow Audio Only
drop-down list for the desired
, or
(
).
2
Analog
page. Adjust the audio
button or the
button or
figure
70,
on the next page) on the left of
1
,
EDID Configuration
and
Audio Breakaway Select
Output Adjustments
XTP CrossPoint Series • HTML Operation
1 1
2 2
1 1
2 2
,
, or
XTP Power
are not
page
139
Advertisement
Table of Contents
