Extron electronics XTP CrossPoint1600 User Manual page 148

1 1
2 2
3 3
4 4
Figure 70. Output Adjustments Page
Possible adjustments include:
• (
2
Allow Audio Only
• ( )
Volume 3
( )
•
Mute 4
•
Embedded Audio Select
Changing the output volume level
You can set the volume level for each analog audio output volume level from
the page. Volume is adjustable through a range of zero steps
I/O Settings
of attenuation (full attenuation, minimum volume) to 64 steps of attenuation
(no attenuation, full volume).
Change the audio volume setting for an output as follows:
1. Click the drop-down list for the desired output (
Volume
drop-down list appears.
2.
Click and drag the slider or click on the scroll up
down button until the desired value is visible.
3. Click and the desired value (
NOTES:
• As an alternative to steps 2 and 3, or to listen to the audio as
you make adjustments, click on the up
button.
• The table, on the next page, defines the value of each audio
volume step.
5 5
)
( )
5
).
2
button or down
XTP CrossPoint Series • HTML Operation
1 1
2 2
, right). A
1
button or the scroll
140