Extron electronics XTP CrossPoint1600 User Manual page 48

The current configuration (see figure 32) is now:
• Video — Input 5 video is tied to output 1, output 3, output 4, and output 8.
Audio — Input 5 audio is tied to output 3, output 4, and output 8.
•
Input 5 video tied
to outputs 1, 3, 4, and 8
Input 5 audio tied
to outputs 3, 4, and 8
Input
5
1
3
Output
4
8
Figure 32. Final Configuration, Example 2
Example 3: Remove a tie from a set of ties
In the following example, an existing tie is removed from the current configuration. The
example shows the front panel indications that result from your actions.
NOTE: This example assumes that you have performed
example 2 on page 39.
1. Clear all selections: Press and release
2. Select audio only for the tie: Press and release
light Audio only.
Press the Video button to toggle on and off.
The button is unlit or background illuminated
when deselected.
3. Select an input: Press and release
Press the button.
The button lights red.
2
1 3 4 5
The Output 3, Output 4, and Output 8 buttons light
red to indicate the audio ties created in example 1.
1 2 3 4 5
The Output 1 button does not light to indicate the tie
created in example 2 because that tie is video only.
Video
Audio
.
Esc
Video
I / O
VIDEO AUDIO
Press the Audio button to toggle on and off.
The button lights red when selected.
.
Input 5
INPUTS
6 7
8 15 16
OUTPUTS
6 7 8 15 16
XTP CrossPoint Series • Operation
example 1 on page 38 and
and as necessary to
Audio
40