Control Buttons - Extron electronics XTP CrossPoint1600 User Manual

Control Buttons

NOTE: See
Primary functions
Action
Indication Blink: Save needed
Secondary functions
Port Action 1
configuration
Action 2
Indication Blink: 9600 baud
Front panel Action 1
locks
Action 2
Audio Action
C
D
Front Panel Operations, beginning on page 35, for detailed
descriptions of the following operations.
Save changes Select Preset mode Select View mode
Blink: Save preset
Lit: Recall preset
ENTER PRESET
Select Configuration mode.
Select 9600 baud Select 19200 baud
Blink: 19200 baud
Select Lock mode 2 or toggle between mode 0 and mode 2.
Enter button (see figure 28
two primary (…) and two secondary functions (•):
Saves configuration or preset changes that you make on the front panel. To create a
…
simple configuration:
Specify video, audio, or both (see I/O buttons [
•
Press the desired input button (
•
Press the desired output button or buttons (
•
Press the Enter button.
•
Indicates that a potential tie has been created but not saved.
…
With the ,
• Preset View
Selects 9600 baud for the rear panel Remote port in Serial Port Configuration mode
•
and indicates the selection.
Preset button (see figure 28
secondary functions (•):
Activates Save Preset mode to save a configuration as a preset and Recall Preset
…
mode to activate a previously-defined preset.
Blinks when Save Preset mode is active and lights steadily when Recall Preset mode
…
is active.
With the , , and
•
Enter View
Selects 19200 baud for the rear panel Remote port in Serial Port Configuration mode
•
and indicates the selection.
With the and
• View Esc
between mode 0 (unlocked) and mode 2.
View mode
selected
VIEW
Select 38400 baud
Blink: 38400 baud
Select Lock mode 1 or toggle between
mode 2 and mode 1.
In Audio mode,
decrease
level or output
volume.
on page 29 or figure 29
).
A
B
, and buttons, selects Serial Port Configuration mode.
Esc
or figure 29) — Preset has two primary (…) and three
buttons, selects Serial Port Configuration mode.
Esc
buttons, selects front panel security Lock mode 2 or toggles
XTP CrossPoint Series • Operation
Cancel or Escape
Blinks once
ESC
Select 115200
baud
Blink: 115200 baud
In Audio mode,
input increase input
level or output
volume.
on page 30) — has
Enter
] and [ ]).
G H
).
32