Table of Contents
Advertisement
I/O Controls
NOTE: See
descriptions of the following operations.
Primary functions
Secondary functions
Resets
Port
Configuration
Audio
Video button (see
G
one primary (…) and two secondary functions (•):
Selects and deselects video for a configuration that is being created or viewed and
…
lights green to indicate that video is available for configuring or for viewing.
With the
•
Selects the RS-232 protocol for the rear panel Remote port in Serial Port
•
Configuration mode and indicates the selection.
Audio button (see
H
secondary functions (•):
Selects and deselects audio for a configuration that is being created or viewed and
…
lights to indicate that audio is available for configuration or viewing.
Selects the Audio mode, in which you can adjust the analog input audio level and
•
the analog output audio volume.
With the
•
Selects the RS-422 protocol for the rear panel Remote port in Serial Port
•
Configuration mode and indicates the selection.
Power LEDs
I
Primary and Redundant Power Supply LEDs —
NOTE: See
the LEDs.
Green — Indicates that the associated power supply is operating within normal
tolerances.
Red — Indicates that the associated power supply is operating outside the normal
tolerances or has failed.
Front Panel
Operations, beginning on page 35, for detailed
Action
Select video
Indication Green: selected
VIDEO
Action 1:
Perform a system reset.
Action
Select RS-232.
Indication Blink: selected
Action
figure 28
on page 29 or
button, commands the front panel system reset.
Audio
figure 28
or
figure
button, commands the front panel system reset.
Video
Power LEDs
on page 28 to identify the power supplies indicated by
Select audio
Red: selected
AUDIO
Select RS-422
Blink: selected
Select Audio mode.
figure 29
on page 30) — Video has
29) — Audio has one primary (…) and three
XTP CrossPoint Series • Operation
34
Advertisement
Table of Contents
