Erps Raps Vlan Settings - D-Link xStack DGS-3400 Series Reference Manual
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
The following fields can be set:
Parameter
Global Status
Log Status
Trap Status
Click Apply to implement the changes.
ERPS RAPS VLAN Settings
This window allows users to search for and display ERPS RAPS information. Enter an R-APS VLAN ID in the field provided.
To view this window, click L2 Features > ERPS > ERPS RAPS VLAN Settings, as shown below.
The following fields can be set:
Parameter
R-APS VID (1-4094)
To search for specific VID, enter the VLAN ID in the R-APS VID (1-4094) field and click Find. To see all the entries, click
View All.
To add a new entry, click Add to see the window shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 3 - 76 ERPS Global Settings window
Description
Enable the global ERPS function on a switch.
Enable or disable the log state of ERPS events. The default value is Disabled.
Enable or disable the trap state of ERPS events. The default value is Disabled
Figure 3 - 77 ERPS RAPS VLAN Table window
Description
The R-APS VLAN is the dedicated VLAN for transferring R-APS message. Enter the R-APS
VLAN ID between 1 and 4094.
231
Advertisement
Table of Contents
