x Stack
Priority
The priority tags are numbered from 0, the lowest priority, to 7, the highest priority. Insert a priority
value, from 0-7 in the Priority field.
Click Apply to implement the changes.
802.1p User Priority Settings
®
The xStack
DGS-3400 Series allows the assignment of a class of service to each of the 802.1p priorities.
To view this window, click QoS > 802.1p Settings > 802.1p User Priority Settings, as shown below.
The following parameters can be configured:
Parameter
Description
Unit
Use the pull-down menu to choose the switch unit from the switch stack.
Enter a port range by using the pull-down menus in the From and To fields.
From / To
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 4 - 3 802.1p User Priority window
243