D-Link xStack DGS-3400 Series Reference Manual page 63

x Stack
The following parameters can be set:
Parameter
Daylight Saving Time
State
Daylight Saving Time
Offset in Minutes
Time Zone Offset from
GMT in +/- HH:MM
DST Repeating Settings - Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires
that the DST beginning and ending date be specified using a formula. For example, specify to begin DST on Saturday
during the second week of April and end DST on Sunday during the last week of October.
From: Which Week
From: Day of Week
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 44 Time Zone and DST Settings window
Description
Use this pull-down menu to enable or disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST
offset - 30, 60, 90, or 120 minutes.
Use these pull-down menus to specify your local time zone's offset from Greenwich Mean
Time (GMT.)
Enter the week of the month that DST will start on.
Enter the day of the week that DST will start on.
Time Zone and DST
50