Dhcp Server Manual Binding - D-Link xStack DGS-3400 Series Reference Manual
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
The following parameters may be configured or viewed:
Parameter
Description
Pool Name
To find the dynamically bound entries of a specific pool, enter the Pool Name into the field and click
Find. Dynamically bound entries of this pool will be displayed in the table. To clear the
corresponding Pool Name entries of this table, click Clear.
Pool Name
This field will denote the Pool Name of the displayed dynamically bound DHCP entry.
IP Address
This field will display the IP address allotted to this device by the DHCP Server feature of this
Switch.
Hardware
This field will display the MAC address of the device that is bound to the corresponding IP address.
Address
Type
This field will display the type of node server being used for the previously configured Net BIOS
Name server of this entry.
Status
This field will display the Status of the entry, whether it was dynamically bound or manually bound.
Life Time (sec)
This field will display, in seconds, the time remaining on the lease for this IP address.
To clear all entries, click Clear All. To see all the entries, click the
DHCP Server Manual Binding
The following windows will allow users to view and set manual DHCP entries. Manual DHCP entries will bind an IP address with
the MAC address of a client within a DHCP pool. These entries are necessary for special devices on the local network that will
always require a static IP address that cannot be changed.
To view this window, click Administration > DHCP Server > DHCP Server Manual Binding, as shown below.
Users may view statically bound DHCP entries within a DHCP pool by entering the Pool Name and clicking Find. Results will be
displayed in the DHCP Server Manual Binding Table. To delete a pool, enter the name in Pool Name and click Clear. To see all
the entries, click the
Show All DHCP Server Manual Binding Table Entries
Add button, which will produce the following window to configure.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 88 DHCP Server Manual Binding Table window
Show All DHCP Server Dynamic Binding Table Entries
link. To set a manual DHCP Binding entry, click the
85
link.
Advertisement
Table of Contents
