D-Link xStack DGS-3400 Series Reference Manual page 170
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
®
x Stack
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 3 - 4 Current Static VLAN Entries window
The Current Static VLAN Entries window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an
existing 802.1Q VLAN, click the corresponding
button under the Delete heading.
To create a new 802.1Q VLAN, click the Add button in the Current Static VLAN Entries window. A new window will appear, as
shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a
description of the parameters in the new window.
Figure 3 - 5 Current Static VLAN Entries - Add window
Click Apply to implement the changes. To return to the Current Static VLAN Entries window, click the
Show All Static VLAN
Entries
link.
To change an existing 802.1Q VLAN entry, click the Modify button of the corresponding entry in the Current Static VLAN
Entries window. A new menu will appear to configure the port settings and to assign a unique name and number to the new
VLAN. See the table below for a description of the parameters in the new menu.
NOTE: The Switch supports up to 4k static VLAN entries.
157
Advertisement
Table of Contents
