D-Link xStack DGS-3400 Series Reference Manual page 296

x Stack
specified:
Click Apply to implement changes made.
To view the settings of a previously correctly created profile, click View in the CPU Interface Filtering Table window to view
the following window:
Figure 5 - 33 CPU Interface Filtering Display window (Packet Content)
The page shown below is the CPU Interface Filtering Profile Configuration for IPv6 page.
Figure 5 - 34 CPU Interface Filtering Configuration window (IPv6)
The following parameters may be configured for the IP CPU filter.
Parameter
Profile ID (1-5)
Type
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
• value (0-15) – Enter a value in hex form to mask the packet from the beginning of the
packet to the 15th byte.
• value (16-31) – Enter a value in hex form to mask the packet from byte 16 to byte 31.
• value (32-47) – Enter a value in hex form to mask the packet from byte 32 to byte 47.
• value (48-63) – Enter a value in hex form to mask the packet from byte 48 to byte 63.
• value (64-79) – Enter a value in hex form to mask the packet from byte 64 to byte 79.
Description
Type in a unique identifier number for this profile set. This value can be set from 1 to 5.
Select profile based on Ethernet (MAC Address), IP address, IPv6 address or Packet
Content Mask. This will change the menu according to the requirements for the type of
profile.
283