D-Link xStack DGS-3400 Series Reference Manual page 107

x Stack
The following parameters may be configured:
Parameter Description
State
Use the pull-down menu to enable or disable the Filter DHCP Server Port State Settings.
Port List Specify the ports that will enable or disable the filter DHCP server. Tick the All Ports check box to
select all ports.
Action Select Add or Delete to add or delete a filter DHCP server entry.
Server IP The IP address of the DHCP server that specifies an allotted server IP address to the client.
Address
Client MAC Specify the MAC address of the client which allowed the requested IP address from the DHCP
Address server.
Port List Enter the list of ports to use the given filter DHCP server entry. Tick the All Ports check box to
select all ports.
Click Apply to implement the changes.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 103 Filter DHCP Server Port State Settings window
Filter DHCP Server Port Settings
94