Dhcpv6 Server Pool Settings - D-Link xStack DGS-3400 Series Reference Manual
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
To view this window, click Administration > DHCPv6 Server > DHCPv6 Server Global Settings, as shown below.
The following parameters may be configured:
Parameter
Global State
Click Apply to implement the changes.
DHCPv6 Server Pool Settings
The window is used to see all the DHCPv6 server pool entries.
To view the following window, click Administration > DHCPv6 Server > DHCPv6 Server Pool Settings, as shown below.
To find the DHCPv6 server pool entries, enter the Pool Name into the field and click Find. Click View All to see all the entries.
To clear all Pool Name entries of this table, click Clear All. To create pool name, click Add, which will produce the following
window to configure.
The following parameters may be configured:
Parameter
Pool Name
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 90 DHCPv6 Server Global Settings window
Description
Use the pull-down menu to globally enable or disable the switch as a DHCP server.
Figure 2 - 91 DHCPv6 Pool Table window
Figure 2 - 92 DHCPv6 Pool Table - Add window
Description
Enter a name of the DHCPv6 server pool.
87
Advertisement
Table of Contents
