Vlan Trunk - D-Link xStack DGS-3400 Series Reference Manual

x Stack
The following parameters can be configured or viewed:
Parameter Description
Unit
Select the switch in the switch stack for which to configure VLANs.
VID
Allows the entry of a VLAN ID in the Add window, or displays the VLAN ID of an existing VLAN in
the Modify window. VLANs can be identified by either the VID or the VLAN name.
VLAN Name Allows the entry of a name for the new VLAN in the Add window, or for editing the VLAN name in
the Modify window.
Advertisement Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Port Settings Allows an individual port to be specified as member of a VLAN.
Tag Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will designate
the port as Tagged.
None Allows an individual port to be specified as a non-VLAN member.
Egress Select this to specify the port as a static member of the VLAN. Egress member ports are ports
that will be transmitting traffic for the VLAN. These ports can be either tagged or untagged.
Forbidden Select this to specify the port as not being a member of the VLAN and that the port is forbidden
from becoming a member of the VLAN dynamically.
Click Apply to implement the changes. To return to the Current Static VLAN Entries window, click the
Entries link.

VLAN Trunk

This window is used to configure VLAN trunk settings.
To view this window, click L2 Features > VLAN > VLAN Trunk, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 3 - 6 Static VLAN window – Edit window
158
Show All Static VLAN