Mac Address Table - D-Link xStack DGS-3400 Series Reference Manual

x Stack

MAC Address Table

This allows the Switch's dynamic MAC address forwarding table to be viewed. When the Switch learns an association between a
MAC address and a port number, it makes an entry into its forwarding table. These entries are then used to forward packets
through the Switch.
To view this window, click Monitoring > MAC Address Table, as shown below.
The functions are used in the MAC address table:
Parameter Description
VLAN Name Enter a VLAN Name for the forwarding table to be browsed by.
VID (1-4094) Enter a VLAN ID for the forwarding table to be browsed by.
MAC Address Enter a MAC address for the forwarding table to be browsed by.
Unit - Port Select the unit of the switch in the switch stack, and a port on that switch, where to find the MAC
address.
Find
Allows the user to move to a sector of the database corresponding to a user defined port, VLAN,
or MAC address.
VID
The VLAN ID of the VLAN of which the port is a member.
VLAN Name The VLAN Name of the VLAN of which the port is a member.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
NOTE: To configure 802.1X features for the xStack
802.1X.
Figure 7 - 30 MAC Address Table window
®
switch, go to Security >
397