Switch Logs - D-Link xStack DGS-3400 Series Reference Manual
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
Timeout (1-65535)
Defines the time-out period while waiting for a response from the remote device. The user may
choose an entry between 1 and 65535 seconds.
Probe (1-9)
The probe value is the number of times the Switch will send probe packets to the next hop on
the intended traceroute path. The default is 1.
Click Start to trace the route of a packet.
Switch Logs
The Web manager allows the Switch's history log, as compiled by the Switch's management agent, to be viewed.
To view this window, click Monitoring > Switch Log, as shown below.
The information in the table is categorized as:
Parameter
Description
Type
Choose the type of log to view. There are two choices:
Regular Log – Choose this option to view regular switch log entries, such as logins or firmware
transfers.
Attack Log – Choose this option to view attack log files, such as spoofing attacks.
Unit
Choose the Unit ID of the switch in the switch stack for which to view the switch log.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 7 - 37 Switch History Logs window
402
Advertisement
Table of Contents
