Display Spbm Non-Stop-Routing Event-Log - HP FlexFabric 5930 Series Command Reference Manual

count: Displays the total number of multicast PWs. If you do not specify this keyword, the command only
displays multicast PW information.
Usage guidelines
Use this command on a BEB that uses tandem replication to verify multicast PW information.
The multicast PW table is empty on the following SPBM nodes:
BEBs that use head-end replication—Head-end replication does not require multicast PWs
•
because frames are tunneled in unicast frames.
BCBs—BCBs do not maintain PWs because multicast PWs are established between BEBs.
•
Examples
# Display all multicast PWs.
<Sysname> display spbm multicast-pw
System ID
0011.2200.0101
Command output
1.
Field
System ID
I-SID
MAC address
B-VLAN
Port
# Display the total number of multicast PWs.
<Sysname> display spbm multicast-pw count
Total entries: 2

display spbm non-stop-routing event-log

Use display spbm non-stop-routing event-log to display the SPBM NSR log.
Syntax
display spbm non-stop-routing event-log slot slot-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID.
Examples
# Display the SPBM NSR log for IRF member device 1.
I-SID MAC address
300 0300-0a00-012c 10
Description
System ID of the remote BEB.
SPBM VSI identifier.
Destination multicast MAC address for frames to be tunneled.
B-VLAN to be encapsulated for frames to be tunneled.
Outgoing interfaces.
36
B-VLAN Port
FGE1/0/1
FGE1/0/2