Member (Zone View) - HP 6127XLG Blade Series Command Reference Manual

*fcid 0x333333 [pwwn 33:33:33:33:33:33:33:33]
zone name #default_zone#
*fcid 0x20abcd
*fcid 0xabcdef
Table 31 Command output
Field
*fcid
fcid
pwwn
fwwn
Related commands
zoneset activate name

member (zone view)

Use member to add a member to a zone.
Use undo member to remove a member from a zone.
Syntax
member { { fcid fcid | fwwn fwwn | pwwn pwwn } [ initiator | target ] | zone-alias zone-alias-name }
undo member { fcid fcid | fwwn fwwn | pwwn pwwn | zone-alias zone-alias-name }
Default
No member exists in a new zone.
Views
Zone view
Predefined user roles
network-admin
Parameters
fcid fcid: Specifies a member by its FC address, in the format of xxxxxx, where x is a hexadecimal
number.
fwwn fwwn: Specifies a member F_Port by its fWWN, in the format of xx:xx:xx:xx:xx:xx:xx:xx, where x
is a hexadecimal number. Adding an F_Port to a zone adds all N_Ports that log in through the F_Port to
that zone.
pwwn pwwn: Specifies a member by its pWWN, in the format of xx:xx:xx:xx:xx:xx:xx:xx, where x is a
hexadecimal number.
initiator: Specifies a member as an initiator. If you do not specify the initiator or target keyword, the
member acts as both an initiator and a target.
target: Specifies a member as a target. If you do not specify the initiator or target keyword, the member
acts as both an initiator and a target.
Description
FC address of the zone member that can be queried from the local name
service database.
FC address of the zone member that does not exist in the local name service
database.
pWWN of a zone member.
fWWN of a zone member.
83