Bosch MPC-xxxx-C Series User Manual page 63

Panel Controller
–
–
–
LED test
To test the LEDs in the LED display:
1.
2.
3.
4.
Key test
To test the functionality of the membrane keypad:
1.
2.
3.
4.
5.
6.
Display test
To test the operativeness of the display:
1.
2.
3.
4.
Display touch test
To test the functionality of the touch-sensitive surface:
1.
2.
3.
4.
5.
Adjust touch screen (Calibration)
To adjust the press precision when touching the touch screen:
1.
2.
3.
Bosch Sicherheitssysteme GmbH
Display test: Test the operativeness of the display.
Display touch test: Test the operativeness of the touch-sensitive surface.
Adjust touch screen (Calibration): Adjust the location precision when touching the touch
screen.
In the start menu, select Diagnostics
Hardware
Display
Select LED test.
For the duration of approx. five seconds, all LEDs on the LED display light up.
In the start menu, select Diagnostics
Hardware
Display
Key test
Press one or more keys on the membrane keypad.
The selected keys on the membrane keypad are depicted on the touch screen.
If a key is pressed twice, this key is shown with a black background. Press the key again
to display it without distinction.
Select Stop key test to end the foil test.
In the start menu, select Diagnostics
Hardware
Display
Select Display test.
First the display is filled with the colors black, white, red, green and blue. After this, line
by line, the display turns to these colors from the top to the bottom and then changes
again to white.
In the start menu, select Diagnostics
Hardware
Display
Select Display touch test.
Touch the touch screen.
A crosshair appears at the touched place.
Press the "back" function key to end the operation.
In the start menu, select Diagnostics
Hardware
Display
User Guide
Diagnostics | en 63
2017.09 | 7.0 | F.01U.258.929