94
en | Search Function/Element
22
Search Function/Element
This chapter contains information about the following points:
–
–
22.1
Menu overview
Search function /
element
22.2
Searching for function and device description
To search for a function or a device:
1.
2.
3.
22.3
Search element
To search for an element which is connected to the system:
1.
2.
3.
4.
2017.09 | 7.0 | F.01U.258.929
Searching for function and device description, page 94
Search element, page 94
-> Search function
In the start menu, select Search function / element
Search function
A list of all functions and device descriptions is displayed.
Refer to Scrolling through lists, page 27 for information on how to navigate through a list.
Select the list field you require.
The submenu of the selected function or device description is displayed.
In the start menu, select Search function / element
Go to element
Three different lists are offered. See also Working with lists, page 26.
Select a list, e.g. By description.
A list of the detectors is displayed. Refer to Scrolling through lists, page 27 for information
on how to navigate through a list.
Select the list field you require.
Different selection fields may be offered for the selected element (e.g. OK, Bypass). What
is displayed depends on:
–
the message types (e.g. fault, alarm etc.) that can be assigned to this element.
–
the mode (e.g. bypassed, reset etc.) that the selected element is in.
Go to element
User Guide
Panel Controller
Bosch Sicherheitssysteme GmbH