Display Elements - Bosch MPC-xxxx-C Series User Manual

20 en | In overview
Alphanumeric keypad
Entry of letters, special characters, and numbers.
Key switch
The key switch has two programmable key positions. Depending on the configuration, it is
possible to switch between day and night operation, for example.
Notice!
Only give the key to people who have been trained to operate the panel controller and who
have knowledge in the area of fire protection. Otherwise, operation may be incorrect and
people may be injured. To prevent possible misuse, remove the key after operation and store
it in a secure location.
4.2

Display elements

LED display
Display
Alarm
Walktest
2017.09 | 7.0 | F.01U.258.929
"Home" key. Call up the start menu.
Return to the previous selection.
"Key" key. Log in and out: Enter user ID and password.
Temporarily switch off the internal buzzer.
"Left arrow" key. Move the cursor one place to the left on the search
screen.
"Right arrow" key. Move the cursor one place to the right on the search
screen.
"Double arrow" key. Switch between status bars if two or more are
available. Call up the status bar to scroll rapidly through lists.
"Enter" key. Confirm an alphanumeric entry. Confirm an entry that is
not confirmed by selecting the OK field on the touch screen.
Color Light signal
Steady Flashes
Red x
Yellow x
User Guide
Meaning
Panel is in alarm state Also
continuously on in event of Fire PAS
System is being tested
Bosch Sicherheitssysteme GmbH
Panel Controller