For Your Information; Open Source License Agreement; Depiction Of Steps - Bosch MPC-xxxx-C Series User Manual

8 en | For your information
1

For your information

Notice!
A language dependent inscription strip (ordering number F.01U.343.398) for insertion into
the main panel controller is attached to this operation guide.
This operation guide contains important information and notes on operating the FPA-5000/
FPA-1200.
Using the step-by-step directions, you can familiarize yourself with the individual functions:
–
–
Each function is described in detail in an individual chapter.
Notice!
In standby mode, the standby screen is displayed. This contains different information
depending on the configuration.
If no longer operated, the panel controller switches to standby mode after 5 minutes and an
alarm event occurs after one hour. The touch screen backlighting switches off. To quit
standby mode, touch any part of the touch screen.
To call up the start menu or change the language display, see Operating principle, page 24.
You will find specific topics in the table of contents. If you are already practiced in the
handling of menus, you can use the overview of all menus in All functions at a glance, page 12.
See also
–
–
–
–
–
–
1.1

Open Source license agreement

Notice!
Bosch Sicherheitssysteme GmbH uses open source software within this product. The
declaration of the components and their respective licenses can be found on http://
www.boschsecurity.com/oss/.
1.2

Depiction of steps

The sequence of steps that you need to execute a function is depicted as follows:
1.
2.
In more detailed form:
1.
2.
3.
2017.09 | 7.0 | F.01U.258.929
In overview, page 19 provides an overview of the operating and display elements and the
touch screen.
In Operating principle, page 24, you will learn how to navigate through the individual
menus and which selection possibilities are available to you.
In overview, page 19
Operating principle, page 24
All functions at a glance, page 12
In overview, page 19
Operating principle, page 24
All functions at a glance, page 12
In the start menu, select Bypass Block
Bypass
Call up the start menu.
Select Bypass Block.
Select Bypass.
User Guide
Panel Controller
Bosch Sicherheitssysteme GmbH