The Optipoint 410 Display Module; Ldap Configuration - Siemens optiPoint 410 Administrator's Manual
Hipath 3000/5000 rsm, hipath 3000 v3.0, hipath 4000 v1.0
Hide thumbs
Also See for optiPoint 410:
- User manual (210 pages) ,
- Operating instructions manual (108 pages) ,
- Administration manual (125 pages)
Table of Contents
Advertisement
Administration
The optiPoint 410 Display Module
LDAP configuration
The following preconditions must be fulfilled to use the corporate tele-
phone directory:
•
•
The LDAP configuration area is protected against unauthorized access
through a password.
Configure LDAP server
To start the application, click the symbol on the start page.
LDAP
Open the context menu and select "Server Settings".
Open the display keyboard and enter the administrator password.
abc
Confirm.
OK
Settings
Server Settings
Server:
Port:
Save
Enter the IP No. and the Port for the LDAP server. The standard Port No. is
"389".
Save the configuration.
Save
62 62 62 62
An LDAP server is available and the server data is entered in the Dis-
play Module (see below).
The LDAP template matching the server configuration was installed
Æ page 63.
abc
137. 1 28. 1 5.230
389|
C
The optiPoint 410 Display Module
?
IP address of the LDAP server
Port No. of the LDAP server
x
Hide quick links:
Advertisement
Table of Contents
