Connection To The System; Figure 7-3 Overview: Connecting An Optipoint Ipadapter To The System; Figure 7-4 Electrical Connection Of The Optipoint Ipadapter; Table 7-1 Pin Assignment - Siemens optiPoint 500 Service Manual

System-specific telephones, key modules, adapters, accessories, service providers
Hide thumbs Also See for optiPoint 500:
Table of Contents

Advertisement

IP Adapter

Connection to the System

7.3
Connection to the System
Hicom/
HiPath
(SLMO
board)
Figure 7-3
Overview: connecting an optiPoint IPadapter to the system
Connect the optiPoint IPadapter to the Hicom system in the following sequence (please also
note the diagram "Electrical connection of the optiPoint IPadapter"):
1.
First of all, connect the U
Use the cable supplied with RJ-11 Mini-Western connectors (point 1).
2.
Connect the IPadapter to the LAN network. Use the LAN network cable (max. 3 m) sup-
plied for this (cable features 3 RJ-45 Mini-Western connector (point 2)).
The optiPoint IPadapter can be operated as a desktop unit or can be mounted on the wall with
a screw. The wall attachment can be found on the back of the IPadapter (point 3).
Figure 7-4
Electrical connection of the optiPoint IPadapter
PIN assignments on the IPadapter
Connector/ jack
U
RJ11
P0/E
LAN
RJ 45
Table 7-1
Pin assignment
7-4
optiPoint
U
1
P0/E
IPadapter
port of the IPadapter to the Hicom system (SLMO board).
P0/E
Pin 1
Pin 2
NC
DC-
a(U
TDX+
TCD-
RXD+
2
Pin 3
Pin 4
) b(U
) DC+
P0/E
P0/E
NC
Nur für den internen Gebrauch
LAN - I/F
10 Base T
1
3
Pin 5
Pin 6
Pin 7
NC
NC
RXD:
NC
P31003-E8400-A100-3-7620
2
Pin 8
NC
Service Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents