Input Module Replacement; About; Procedure - Precor GEN06 Series C952 Service Manual

Input Module Replacement

About

This procedure provides instruction to remove and replace the AC Input Module.

Procedure

Review entire procedure before starting.
1. Set the treadmill circuit breaker to OFF and unplug the treadmill's power cord from the
AC outlet.
2. Remove the treadmill's hood.
3. Remove the two screws that fasten the AC input panel to the frame. Keep fasteners for
replacement installation.
4. Incline the AC input panel from the frame and rotate it to expose the AC line cord clamp
screws and input module screws
5. .Remove the mounting screws and remove the AC power cord clamp. Keep fasteners
for replacement installation
6. Disconnect the AC line cord from the input module.
7. Disconnect the wiring from the AC input module (1 blue wire, 1 brown wire and 1
green/yellow wire).
8. Remove the mounting screws and remove the AC input module. Keep fasteners for
replacement installation:
(Undefined variable: TRM700-16Base.ServiceManualTitle)
5 Replacement Procedures
Input Module Replacement
53