Precor GEN06 Series C952 Service Manual page 51

Tension and Tracking Adjustment" on page 26
17. Replace the belt guard cover ensuring the tabs are firmly locked into position on the
Take Up Roller shaft (see
page).
18. Replace the end cap (see
page).
19. Replace the hood cover.
20. Verify treadmill operation (see
.See Also
"Replacement Procedures" on page 29
"Adjustment Procedures" on page 20
"Running Belt and Deck Replacement" on page 61
(Undefined variable: TRM700-16Base.ServiceManualTitle)
procedure.
"End Cap & Belt Guard Cover Replacement" on the next
"End Cap & Belt Guard Cover Replacement" on the next
"Operation Verification" on
5 Replacement Procedures
Drive Roller Replacement
page 8) and return to service.
45