Treadmill Base Operation - Precor GEN06 Series C952 Service Manual

8 Theory of Operation

Treadmill Base Operation

(Lower PCA "LPCA") which then performs the actual machine function.
The two processors communicate via a serial data stream. When the user makes a request via
a machine control or the keypad, the console processor communicates the command to the
processor in the lower electronics module.
When the lower processor receives a command the lower control module performs the
machine function. The console processor continues to monitor machine controls, keypad
entry, lower board status, and provide user feedback information.
The lower board base processor also provides machine operation and error status (error log
codes) to the console processor.
Treadmill Base Operation
Input Power
The GEN-06 / TRM10 base is equipped with a removable line cord plugged into a power entry
socket. This is designed to accommodate either 120V or 240V NEMA compatible line cords,
as well as line cords for other countries. The diagram below shows a NEMA 20A plug for both
(Undefined variable: TRM700-16Base.ServiceManualTitle) 104