Club Parameter - Settings (5651565) - Precor GEN06 Series C952 Service Manual

DIAGNOSTIC
TEST
Numeric Backlight
Test
Numeric Display
Test
Heart Rate Test

Club Parameter - Settings (5651565)

Service Access Code: 5, 6, 5, 1, 5, 6, 5 (see
Club Parameters or Club Settings are used to manage and configure the usage of the
machine. Select a console model to view the available club parameters.
Standard, P10, P20, & P30 consoles:
CLUB PARAMETER
SAFETY CODE
(Treadmill only)
SELECT LANGUAGE
SET UNITS
SET MAX WORKOUT
TIME
SET MAX PAUSE
TIME
SET COOL DOWN
TIME
(Undefined variable: TRM700-16Base.ServiceManualTitle)
Tests the backlight level on the speed and incline parameter displays.
Tests the speed and incline numeric indicators.
Tests the Hands ON/OFF Status, Raw and Filtered pulse values. Grasp the
touch grips to test the hand held heart rate. Use a Polar heart rate simulator to
test the wireless heart rate.
Range: Enable/Disable
Default: Disabled
Enable or disable* the Safety Code. When enabled, the setting
requires a password "1234" to be entered to start the unit.
Default: English
Sets the default language for all workouts on this machine. Lan-
guage for single use workouts can still be set by the user from the
workout options.
Range: U.S, Metric
Default: U.S.
Sets units of measure to US standard* or Metric.
Range: 1 to 240 min, NO LIMIT
Default: 60 min
Sets the maximum allowable user workout time per session.
Range: 1 to 120 sec
Default: 120 sec
Sets how long the equipment remains in a paused banner during a
workout before resetting.
Range: 1 to 5 min
Default: 5 min
Sets the amount of time that a cool down period will occur at the
end of every workout. Factory default is 5 minutes. Settable in 1
minute increments.
Club Parameter - Settings (5651565)
TEST DESCRIPTION
"Service Access Codes" on
DESCRIPTION
3 Standard Service Software
page 10)
15