Precor GEN06 Series C952 Service Manual page 17

software.
Standard, P10, and P30 Consoles
To access the service software:
Press either the STOP, PAUSE, or RESET key.
l
Sequentially type in the service access code using the numeric keypad.
l
NOTE: The access code must be correctly and quickly entered or the process will
abort. Restart the process from the beginning if this occurs.
P20 Consoles
To access the service software:
(Undefined variable: TRM700-16Base.ServiceManualTitle)
3 Standard Service Software
Accessing the Service Software
11