Precor GEN06 Series C952 Service Manual page 34

2. Increase the speed to 9 mph (14 kph) and then 12 mph (19 KPH) making sure that the
tracking remains centered, make small adjustments as needed.
3. Verify that the treadmill is level, adjust as necessary.
4. Verify the running belt/deck surfaces are clean.
5. Replace all covers.
6. Verify treadmill operation (see
.See Also
"Adjustment Procedures" on page 20
"Running Belt and Deck Replacement" on page 61
(Undefined variable: TRM700-16Base.ServiceManualTitle)
Running Belt Tension and Tracking Adjustment
"Operation Verification" on
4 Adjustment Procedures
page 8) and return to service.
28