Lubrication; Cleaning Solutions; Electrical Requirements - Precor GEN06 Series C952 Service Manual

most current parts information including the Exploded View Diagram and Parts Identification
List .
Precor Connect Partner
l
Exploded View Diagram and Parts list, see
.

Lubrication

Use only synthetic lubricants such as Mobile 1 Synthetic grease or Super Lube with Teflon.
Use of unapproved lubricants, cleaners, or solvents may void the bike warranty.
CAUTION: Do not apply any lubricants or wax to the deck and belt. Do not use Wax
Blast, silicon sprays, or other applied lubricants. The use of these lubricants will quickly
degrade the low-friction surface of the deck.
CAUTION: Do not use petroleum based lubricants on mechanical components such
as the lift, as this may result in degradation of nylon gearing mechanisms. Use only syn-
thetic lubricants such as "Super Lube with Teflon" or "Mobile One Synthetic" grease
(RED).
Use of unapproved lubricants, cleaners, or solvents may void the treadmill warranty.

Cleaning Solutions

Wipe down equipment with recommended cleaning solution. Use dry cloth to remove residue
solution.
General: 1 oz. mild soap (Simple Green) to 30 oz. water.
l
Console and PVS: a diluted solution of one part 91% Isopropyl alcohol to one part
l
water.
CAUTION: Do not use acidic cleaners and do not spray directly onto the equipment
surfaces.

Electrical Requirements

(Undefined variable: TRM700-16Base.ServiceManualTitle)
website
"Parts" on page 111.
1 Introduction
General Information
4