Precor GEN06 Series C952 Service Manual page 39

7. Reconnect the Auto Stop Cable to the Auto Stop Sensor Assembly.
8. Replace front hood and side step cover.
9. Connect power cord and Switch the input power ON.
10. Verify the Auto Stop function by doing the Auto Stop diagnostics test, see
Validation - Diagnostic Tests (51765761)" on
11. Verify treadmill operation per
to service.
.See Also
"Replacement Procedures" on page 29
(Undefined variable: TRM700-16Base.ServiceManualTitle)
page 13.
""Operation Verification Procedure" on
5 Replacement Procedures
Auto Stop Sensor Replacement
"Hardware
page 8" and return
33