Treadmill Safety Features; Using The Safety Clip - Precor M9.57 Owner's Manual

Treadmill Safety Features

The treadmill is equipped with certain items that, when used
properly, help sustain an enjoyable workout. These items
include:
• Safety clip
• Safety code
• Handrails
• I/O power switch
Important: Before exercising, review the Important Safety
Instructions found at the beginning of this manual.

Using the Safety Clip

Attach the safety clip to your clothing before each workout.
Refer to Diagram 3. A tug on the lanyard trips the safety
switch inside the display console and stops the running belt.
If the safety switch trips while you are exercising, the running
belt stops and the treadmill enters pause mode.
Owner's Manual: Treadmill Safety Features
To resume exercising, take the following steps:
1. If needed, reattach the safety clip to your clothing.
2. Straddle the running belt.
3. Press QUICKSTART.
4. If needed, enter the safety code.
5. Hold onto a handrail while you step on to the running belt
with the speed at or below 1 mph or 1 kph.
Note: The treadmill retains your workout statistics if you
resume exercising within ten minutes.
Diagram 3: Attach the safety clip to your clothing
Safety clip
Lanyard
9