Cancel Display; Nightlight Enable; Nightlight Brightness; Silence Keypress Tone - Bosch B9512G Program Entry Manual

118 en | Keypads
5.1.22

Cancel Display

Default: Yes (for all KP addresses)
Selections:
–
–
Select whether or not the keypad displays a message if a burglar alarm is canceled after the
control panel sends a burglar alarm report to the central station.
To show this message, Cancel Reports must be set to Yes. When upgrading a non-control
panel account to a control panel account, RPS forces the default to No.
RPS Menu Location
Keypads > Keypad Assignments > Cancel Display.
Further information
Cancel Reports, page 75
5.1.23

Nightlight Enable

Default: No (for all KP addresses)
Selections: Yes, No
Users with authority to change the keypad display can select whether or not to enable the
nightlight feature on the keypad.
When set to Yes, The display backlight and key backlight (B920, B930) shall remain
illuminated at the minimum level when the keypad is "Idle".
RPS Menu Location
Keypads > Keypad Assignments > Nightlight Enable
5.1.24

Nightlight Brightness

Default: 2
Selections: 0 to 6
0 = Nightlight off
1 to 6 - increases or decreases nightlight brightness. The higher the number, the brighter the
nightlight.
This parameter sets the brightness level for the backlight on the keypad display.
RPS Menu Location
Keypads > Keypad Assignments > Nightlight Brightness
5.1.25

Silence Keypress Tone

Default: No (for all KP addresses)
Selections:
–
–
This parameter enables or disables the key press acknowledgement tone on the keypad.
This option can only be set from RPS.
RPS Menu Location
Keypads > Keypad Assignments > Silence Keypress Tone
5.1.26

Show Date and Time

Default: No (for all KP addresses)
Selections: Yes, No
2017.03 | 09 | F.01U.303.998
Yes - this keypad displays a message for all canceled alarms within its scope.
No - this keypad does not display a message for canceled alarms within its scope.
Yes - disable key press acknowledgement tone. Keypad is silent when buttons are
pressed.
No - enable key press acknowledgement tone. Users hear a tone each time they press a
button on the keypad.
Program Entry Guide
Control Panel
Bosch Security Systems, Inc.