Battery Trouble; Phone Fail; Comm Fail; Log % Full - Bosch B9512G Program Entry Manual

138 en | Output Parameters
8.2.2

Battery Trouble

Default: 0
Selections:
–
–
This parameter enables the output to activate when battery voltage falls below 12.1 VDC, or
when the battery is in a missing condition. The output automatically resets when battery
power is restored.
Connect a separate sounder to this output to create an audible annunciation from the keypads
for all applications excluding commercial fire systems.
RPS Menu Location
Output Parameters > Panel Wide Outputs > Battery Trouble
8.2.3

Phone Fail

Default: 0
Selections:
–
–
This parameter enables the output to activate when a telephone line failure alarm is
generated. The output automatically resets when the telephone line restores.
A time must be entered in Phone Supervision Time in order for this output to activate.
RPS Menu Location
Output Parameters > Panel Wide Outputs > Phone Fail
8.2.4

Comm Fail

Default: 0
Selections:
–
–
When there is a Comm Fail event for any Route Group the output you enter at this parameter
activates. The output automatically resets when a report from the Route Group is sent to the
central station receiver successfully. To learn more about Comm Fail events refer to
Communicator, overview, page 58.
RPS Menu Location
Output Parameters > Panel Wide Outputs > Comm Fail
8.2.5

Log % Full

Default: 0
Selections:
–
–
This parameter sets the number of the output that activates when the log has reached the
programmed percentage of its capacity as programmed in Log % Full, page 71. A steady
output is provided until the RPS pointer is set.
RPS Menu Location
Output Parameters > control panel Wide Outputs > Log % Full (Outputs)
Additional resources
See Get History for more information.
2017.03 | 09 | F.01U.303.998
B9512G: 0 to 599
B8512G: 0 to 99
B9512G: 0 to 599
B8512G: 0 to 99
B9512G: 0 to 599
B8512G: 0 to 99
B9512G: 0 to 599
B8512G: 0 to 99
Program Entry Guide
Control Panel
Bosch Security Systems, Inc.