Primary Destination Device - Bosch B9512G Program Entry Manual

Control Panel
If the Primary Destination Device is an IP Destination (Onboard IP, Plug-in Cellular IP, SDI2
Address 1, or SDI2 Address 2), the control sends the original event along with a COMM
TROUBLE report that includes an SDI2 number modifier (SDI2##). The SDI2 modifier identifies
the IP Destination Device type. Refer to the table below.
Destination Device
Onboard Ethernet
Onboard Cellular
SDI2 Address 1
SDI2 Address 2
For example, a COMM TROUBLE report for Route Group 1 with the Primary Destination Device
assigned to Plug-in Cellular, Destination 2 would be: COMM TROUBLE RG1 SDI228
The control panel generates COMM TROUBLE events when positive acknowledgement from
the central station receiver to a polls are not received after the configured number of retries.
If all attempts to both the primary destination device and the backup destination device fail, a
COMM FAIL RG# event is generated. COMM RESTORE events are not generated for COMM
FAIL events.
Notice!
CAN/ULC S304 requirement, do not clear pending reports
When CAN/ULC S304 is set to YES, the control panel does not clear pending reports before
creating a COMM FAIL event. It continues to queue reports for the failed route until one of
the failed routes in the route group restores. If the queue reaches the capacity of the panel
event log, the oldest reports are cleared (overwritten).
3.10.1

Primary Destination Device

Default: No Device
Selections:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Bosch Security Systems, Inc.
SDI2 number
modifier for IP
Type Destination 1
No Device
Onboard IP Destination 1
Onboard IP Destination 2
Onboard IP Destination 3
Onboard IP Destination 4
Plug-in Cellular Destination 1
Plug-in Cellular Destination 2
Plug-in Cellular Destination 3
Plug-in Cellular Destination 4
Plug-in Phone Destination 1
Plug-in Phone Destination 2
Plug-in Phone Destination 3
Plug-in Phone Destination 4
SDI2 address 1 Destination 1
SDI2 address 1 Destination 2
SDI2 address 1 Destination 3
SDI2 address 1 Destination 4
SDI2 address 2 Destination 1
SDI2 address 2 Destination 2
SDI2 number
modifier for IP
Destination 2
10 20
18 28
11 21
12 22
Program Entry Guide
Panel Wide Parameters | en
SDI2 number SDI2 number
modifier for IP modifier for IP
Destination 3 Destination 4
30
38
31
32
2017.03 | 09 | F.01U.303.998
59
40
48
41
42