Display Panel Type And Revision; Change Skeds; Custom Function - Bosch B9512G Program Entry Manual

Control Panel
–
This parameter allows the user with this authority level to temporarily switch to a different
area and perform keypad functions related to the area to which the keypad is switched.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > Go to Area
9.4.35

Display Panel Type and Revision

Default:
Authority Levels 1, 15: Enabled (E)
Authority Levels 2-14: Blank (-)
Selections:
–
–
This parameter allows the user with this authority level to display the control panel firmware
revision. All keypads will display the firmware revision as a Major.Minor.Micro value with the
following format ##.##.###.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > Display Panel Type and Revision
9.4.36

Change Skeds

Default:
Authority Levels 1, 15: Enabled (E)
Authority Levels 2-14: Blank (-)
Selections:
–
–
This parameter allows the user with this authority level to change skeds that can be edited.
Skeds can be restricted from being edited by setting Time Edit, page 216 to No.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > Change Skeds
9.4.37

Custom Function

Default:
Authority Level 1: Enabled (E) for Custom Functions 128 to 143 only; Blank (-) for Custom
Functions 144 to 159.
Authority Levels 2-15: Blank (-)
Selections:
–
–
Allow the user with this authority level to execute the desired Custom Function.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
Bosch Security Systems, Inc.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Program Entry Guide
User Configuration | en 169
2017.03 | 09 | F.01U.303.998